LED display production and repairing
LED display production and repairing
Jun 30LED display production and repairing
Summary: Many new friends who is starting to produce the LED display screen, on the small screen, making a simple little confused body, so our company compiled a production method and cost, for your reference; a complete Led display board should include a display unit (module) , borders, Li article, power, control card to the five pieces of P10 following single red case with all the outdoor production of a screen of about 3m * 0.4m
Led display a lot of friends started going to the line, making simple little screen on the body of a little confused, so order a bit personal production methods and costs, for reference; should include a full-screen display unit board (module), borders, Li section, power supply, control cards following these five pieces to P10 outdoor red case with a single to make a 3m * 0.4m people around the screen:
1.Led display modules part: as a single red led display P10 outdoor size: 320 * 160mm, it should be made of 3m * 0.4m, you need 9 * 2 = 18 module, the display size is a long 9 = 2.88 0.32 * m.
high 0.16 * 2 = 0.32m. then show some of the costs (calculated by the number of blocks) can be calculated; other modules are equipped with a fixed connection to the film, screws, pillars, cable, power cord.
2.Led display frame some of the general black and silver aluminum alloy frame 3.5cm * 9cm, the case of Screen Size 2.88 * 0.32m, that border is used for perimeter = (2.88 0.32) * 2 = 6.4m, another corner of 4 , then the border around the cost (calculated by the meter) can be calculated, remember to punch, matching plates and screws.
3.Led display stand is to be part of the aluminum screen body established within the framework of Article, each column requires two cell board, the case with the nine modules long, there will be established with a 9 * 2 = 18, the length of each is the total height of unit board: 0.16 * 2 = 0.32m, set bar costs (calculated by the meter) is: 18 * 0.32 * unit price, remember to punch, with screws.
4.Led display power supply used power 5V30A, 5V40A, the brand will be more. A 5V40A power generally with 8 indoor color plates, 6 color plates; case in general with the power of a 5V40A 12 P10 Outdoor Monochrome , with two 5V30A can.
5.Led display some Lai Research asynchronous system asynchronous type 1, type 2, the case 288 * 32 points of the CPC, and is 1 / 4 scan, so the card with the type Ⅱ, the factory has equipped with cable..
Make the finished product size: L = 2.88 0.035 * 2 = 2.95m, high = 0.32 0.07 = 0.39m.
Production and maintenance LED display
LED display maintenance: various indoor and outdoor electronic Led display any faults, whether it is technical failure, or improper operation caused by there not too long after-sales service, and lost the software, we are able to troubleshoot. And provides LED display control systems, indoor and outdoor double base led display (full color) color driver board maintenance and renovation and software upgrades; to provide service over the entire screen.
• LED display parts supply: software, asynchronous, synchronous control system, monochrome, dual-color, full-color control system; 3.0,3.75,5.0 single-color display unit boards, display unit circuit boards, dot matrix display unit module, driver IC; parts products can provide.
• LED display manufacturing training: supporting hardware and software debugging, install the screen structure to provide for the maintenance and manufacture of display systems with detailed circuit design of the PCB map.